The most user-friendly small laminating machine
Main reasons to choose a TAULER PrintLamB1S:
- Because it is the most USER-FRIENDLY laminator made in EU.
- Because its automatic registration system facilitates the task to the operator.
- Because it only occupies 2 m2 IN USE and 1 m2 stopped.
- Because it incorporates a silent compressor.
- Because you can stamp toner prints with the TAULER_FOIL system.
- For its intuitive touch screen.
- Because it incorporates a REVERSE MODE to correct possible errors.
- Because it incorporates non-stick rollers for easy use.
- Because it incorporates TAULER_GO ON, an automatic starting system.
Technical details:
- Manual feeding and automatic registration.
- Adjustable side guide.
- Temperature control by sensor.
- Pneumatic pressure roller.
- Easily adjustable decurling system.
- Photocell that stops the machine in case of sheet failure.
- 2 complete reel holders for quick and easy changeover.
- Total control of the machine through a PLC.
- Electronically adjustable speed.
- Microperforation cutting system and scissor roller.
Maximum length [A]: 150 cm
Maximum width [B]: 73 cm
Maximum height [C]: 147 cm
Weight: 400 kg
Fill out the following form and get our catalogue.
"*" indicates required fields
Technical specifications
| Maximum format | 450×690 mm |
| Minimum format | 200×200 mm |
| Maximum mechanical speed | 2 – 12 m/min* |
| Paper thickness | 130 a 400 g/m2 |
| Film thickness | 20 to 42 μm |
| Electrical power installed | 2 kW |
| Power supply | 230 V single phase 50 Hz |
| Security | CE-compliant protections, emergency stops, and safety sensors. |
*According to film, external conditions, paper type, thickness, and formats.
TAULER reserves the right to modify the characteristics of this product without prior notice. The image shown and the information reflected in this web & brochure does not establish contractual information. TAULER AND PRINTLAM ARE A REGISTERED TRADEMARK OF TAULER LAMINATING TECH, SL
Formulario de Contacto
"*" indicates required fields